With Retail Package:No
Compatible Phone Brand:SAMSUNG
Compatible Samsung Model:Galaxy Note 9,Galaxy S9,Galaxy S8,Galaxy S9 Plus,Galaxy Note 8,Galaxy S8 Plus
Model Number:For S8 S8 PLUS NOTE 8 S9 S9 PLUS NOTE 9
Protector Type:UV Glass protector ( LOCA TECHNOLOGY)
Full Glue Film:Yes (Not Circle around edge Glue Glass)
Touch fuction:More Sensitive than circle glue film
Glass Version:Full Cover ( But leave space for cases around the edge)
Glass Thickness:0.26 mm
Glass Hardness:9H and Strenghten Glass
Glass Surface:Olephobic Coating anti fingerprint
UV Glue capacity:2 ML ( LOCA glue)
Curing Time:5 minutes or more
Easy to tear the glass off:Can be easy to peel the glass up by use sharp goods
Reused UV Lamp:Yes (if you have it, you can choose no UV Lamp option)
About Package:Foam Box (No broken Pack)
Akcoo Full Cover UV Glass for Samsung S8 / S9 / S8 Plus / S9 Plus / Note 8 / Note 9
How to install
(Watch the instal Video before you instal it)
Step 1 : Clean the screen with the wet wipe and cloth and removing any case from you phone
Step 2 : Stick the earpiece hole with the label,and then use a knife or scissor open the liquid adhesive box,drop it on the screen(It is recommended that the glue be poured completely.The glue that drops on the screen can’t have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. )
Step 3 : Peel off the mask film from the glass,then place the screen protector to a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD,JUST LET IT AUTOMATIC DISPERSION.(Very important)
Step 4 : Wait for about half a minute to let the adhesive spread and level.
Step 5 : If the adhesive overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone’s tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
Step 6 : Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
Step 7 : Irradiate the mobile phone under UV lamp and need to illuminate twice for about 5 minutes to reach the fully-cured position.
Step 8 : Clear the screen,and turn off the UV lamp for reuse.